Language/OS - Multiplatform Resource Library

home *** CD-ROM | disk | FTP | other *** search

/ Language/OS - Multiplatform Resource Library / LANGUAGE OS.iso / gnu / emacs.lha / emacs-19.16 / info / emacs-13 (.txt) < prev next >

Wrap

GNU Info File | 1993-07-06 | 49KB | 875 lines

This is Info file ../info/emacs, produced by Makeinfo-1.54 from the input file emacs.texi. File: emacs, Node: Rmail Reply, Next: Rmail Summary, Prev: Rmail Labels, Up: Rmail Sending Replies =============== Rmail has several commands that use Mail mode to send outgoing mail. *Note Sending Mail::, for information on using Mail mode. What are documented here are the special commands of Rmail for entering Mail mode. Note that the usual keys for sending mail, `C-x m' and `C-x 4 m', are available in Rmail mode and work just as they usually do. Send a message (`rmail-mail'). Continue editing already started outgoing message (`rmail-continue'). Send a reply to the current Rmail message (`rmail-reply'). Forward current message to other users (`rmail-forward'). `C-u f' Resend the current message to other users (`rmail-resend'). `M-m' Try sending a bounced message a second time (`rmail-retry-failure'). The most common reason to send a message while in Rmail is to reply to the message you are reading. To do this, type `r' (`rmail-reply'). This displays the `*mail*' buffer in another window, much like `C-x 4 m', but preinitializes the `Subject', `To', `CC' and `In-reply-to' header fields based on the message you are replying to. The `To' field is starts out as the address of the person who sent the message you received, and the `CC' field starts out with all the other recipients of that message. You can exclude certain recipients from being placed automatically in the `CC', using the variable `rmail-dont-reply-to-names'. Its value should be a regular expression (as a string); any recipient that the regular expression matches, is excluded from the `CC' field. The default value matches your own name, and any name starting with `info-'. (Those names are excluded because there is a convention of using them for large mailing lists to broadcast announcements.) To omit the `CC' field completely for a particular reply, enter the reply command with a prefix argument: `C-u r'. Once the `*mail*' buffer has been initialized, editing and sending the mail goes as usual (*note Sending Mail::.). You can edit the presupplied header fields if they are not right for you. You can also use the commands of Mail mode, including `C-c C-y' to yank in the message that you are replying to, and `C-c C-q' to fill what was thus yanked. You can also switch to the Rmail buffer, select a different message, switch back, and yank the new current message. Sometimes a message does not reach its destination. Mailers usually send the failed message back to you, enclosed in a "failure message". The Rmail command `M-m' (`rmail-retry-failure') prepares to send the same message a second time: it sets up a `*mail*' buffer with the same text and header fields as before. If you type `C-c C-c' right away, you send the message again exactly the same as the first time. Alternatively, you can edit the text or headers and then send it. Another frequent reason to send mail in Rmail is to "forward" the current message to other users. `f' (`rmail-forward') makes this easy by preinitializing the `*mail*' buffer with the current message as the text, and a subject designating a forwarded message. All you have to do is fill in the recipients and send. When you forward a message, recipients get a message which is "from" you, and which has the original message in its contents. "Resending" is an alternative similar to forwarding; the difference is that resending sends a message that is "from" the original sender, just as it reached you--with a few added header fields `Resent-from' and `Resent-to' to indicate that it came via you. To resend a message in Rmail, use `C-u f'. (`f' runs `rmail-forward', which is programmed to invoke `rmail-resend' if you provide a numeric argument.) The `m' (`rmail-mail') command is used to start editing an outgoing message that is not a reply. It leaves the header fields empty. Its only difference from `C-x 4 m' is that it makes the Rmail buffer accessible for `C-c C-y', just as `r' does. Thus, `m' can be used to reply to or forward a message; it can do anything `r' or `f' can do. The `c' (`rmail-continue') command resumes editing the `*mail*' buffer, to finish editing an outgoing message you were already composing, or to alter a message you have sent. File: emacs, Node: Rmail Summary, Next: Rmail Editing, Prev: Rmail Reply, Up: Rmail Summaries ========= A "summary" is a buffer containing one line per message to give you an overview of the mail in an Rmail file. Each line shows the message number, the sender, the labels, and the subject. When the summary buffer is selected, you can use almost all Rmail commands; these apply to the message described by the current line of the summary. Moving point in the summary buffer selects messages as you move to their summary lines. A summary buffer applies to a single Rmail file only; if you are editing multiple Rmail files, each one has its own summary buffer (if you have asked for one). The summary buffer name is made by appending `-summary' to the Rmail buffer's name. Normally only one summary buffer is displayed at a time. * Menu: * Rmail Make Summary:: Making various sorts of summaries. * Rmail Summary Edit:: Manipulating messages from the summary. File: emacs, Node: Rmail Make Summary, Next: Rmail Summary Edit, Up: Rmail Summary Making Summaries ---------------- Here are the commands to create a summary for the current Rmail file. Once the Rmail file has a summary buffer, changes in the Rmail file (such as deleting or expunging messages, and getting new mail) automatically update the summary. `C-M-h' Summarize all messages (`rmail-summary'). `l LABELS RET' `C-M-l LABELS RET' Summarize message that have one or more of the specified labels (`rmail-summary-by-labels'). `C-M-r RCPTS RET' Summarize messages that have one or more of the specified recipients (`rmail-summary-by-recipients'). `C-M-t TOPIC RET' Summarize messages that have a match for the specified regexp TOPIC in their subjects (`rmail-summary-by-topic'). The `h' or `C-M-h' (`rmail-summary') command fills the summary buffer for the current Rmail file with a summary of all the messages in the file. It then displays and selects the summary buffer in another window. `C-M-l LABELS RET' (`rmail-summary-by-labels') makes a partial summary mentioning only the messages that have one or more of the labels LABELS. LABELS should contain label names separated by commas. `C-M-r RCPTS RET' (`rmail-summary-by-recipients') makes a partial summary mentioning only the messages that have one or more of the recipients RCPTS. RCPTS should contain mailing addresses separated by commas. `C-M-t TOPIC RET' (`rmail-summary-by-topic') makes a partial summary mentioning only the messages whose subjects have a match for the regular expression TOPIC. Note that there is only one summary buffer for any Rmail file; making one kind of summary discards any previously made summary. File: emacs, Node: Rmail Summary Edit, Prev: Rmail Make Summary, Up: Rmail Summary Editing in Summaries -------------------- You can use the Rmail summary buffer to do almost anything you can do in the Rmail buffer itself. In fact, once you have a summary buffer, there's no need to switch back to the Rmail buffer. You can select and display various messages in the Rmail buffer, from the summary buffer, just by moving point in the summary buffer to different lines. It doesn't matter what Emacs command you use to move point; whichever line point is on at the end of the command, that message is selected in the Rmail buffer. Almost all Rmail commands work in the summary buffer as well as in the Rmail buffer. Thus, `d' in the summary buffer deletes the current message, `u' undeletes, and `x' expunges. `o' and `C-o' output the current message to a file; `r' starts a reply to it. You can scroll the current message while remaining in the summary buffer using SPC and The Rmail commands to move between messages also work in the summary buffer, but with a twist: they move through the set of messages included in the summary. They also redisplay the Rmail buffer on the screen (unlike cursor motion commands, which update the contents of the Rmail buffer but don't display it in a window unless it already appears). Here is a list of these commands: Move to next line, skipping lines saying `deleted', and select its message. Move to previous line, skipping lines saying `deleted', and select its message. `M-n' Move to next line and select its message. `M-p' Move to previous line and select its message. Move to the last line, and select its message. Move to the first line, and select its message. `M-s PATTERN RET' Search through messages for PATTERN starting with the current message; select the message found, and move point in the summary buffer to that message's line. Deletion, undeletion, and getting new mail, and even selection of a different message all update the summary buffer when you do them in the Rmail buffer. If the variable `rmail-redisplay-summary' is non-`nil', these actions also bring the summary buffer back onto the screen. When you are finished using the summary, type `w' (`rmail-summary-wipe') to kill the summary buffer's window. You can also exit Rmail while in the summary. `q' (`rmail-summary-quit') kills the summary window, then saves the Rmail file and switches to another buffer. File: emacs, Node: Rmail Editing, Next: Rmail Digest, Prev: Rmail Summary, Up: Rmail Editing Within a Message ======================== Rmail mode provides a few special commands for moving within and editing the current message. In addition, the usual Emacs commands are available (except for a few, such as `C-M-n' and `C-M-h', that are redefined by Rmail for other purposes). However, the Rmail buffer is normally read-only, and to alter it you must use the Rmail command `e' described below. Toggle display of original headers (`rmail-toggle-headers'). Edit current message (`rmail-edit-current-message'). Rmail reformats the header of each message before displaying it. Normally this involves deleting most header fields, on the grounds that they are not interesting. The variable `rmail-ignored-headers' specifies a regexp that matches the header fields to discard in this way. The original headers are saved permanently, and to see what they look like, use the `t' command (`rmail-toggle-headers'). This discards the reformatted headers of the current message and displays it with the original headers. Repeating `t' reformats the message again. Selecting the message again also reformats. The Rmail buffer is normally read only, and most of the characters you would type to modify it (including most letters) are redefined as Rmail commands. This is usually not a problem since it is rare to want to change the text of a message. When you do want to do this, the way is to type `e' (`rmail-edit-current-message'), which changes from Rmail mode into Rmail Edit mode, another major mode which is nearly the same as Text mode. The mode line indicates this change. In Rmail Edit mode, letters insert themselves as usual and the Rmail commands are not available. When you are finished editing the message and are ready to go back to Rmail, type `C-c C-c', which switches back to Rmail mode. Alternatively, you can return to Rmail mode but cancel all the editing that you have done by typing `C-c C-]'. Entering Rmail Edit mode runs the hook `text-mode-hook'; then it runs the hook `rmail-edit-mode-hook' (*note Hooks::.). It adds the attribute `edited' to the message. File: emacs, Node: Rmail Digest, Next: Out of Rmail, Prev: Rmail Editing, Up: Rmail Digest Messages =============== A "digest message" is a message which exists to contain and carry several other messages. Digests are used on some moderated mailing lists; all the messages that arrive for the list during a period of time such as one day are put inside a single digest which is then sent to the subscribers. Transmitting the single digest uses much less computer time than transmitting the individual messages even though the total size is the same, because the per-message overhead in network mail transmission is considerable. When you receive a digest message, the most convenient way to read it is to "undigestify" it: to turn it back into many individual messages. Then you can read and delete the individual messages as it suits you. To do this, type `M-x undigestify-rmail-message' after selecting the digest message. This extracts the submessages as separate Rmail messages, and inserts them following the digest. The digest message itself is flagged as deleted. File: emacs, Node: Out of Rmail, Next: Rmail Rot13, Prev: Rmail Digest, Up: Rmail Converting an Rmail File to Mailbox Format ========================================== The command `M-x unrmail' converts a file in Rmail format to ordinary system mailbox format, so that you can use it with other mail-editing tools. You must specify two arguments, the name of the Rmail file and the name to use for the converted file. `M-x unrmail' does not alter the Rmail file itself. File: emacs, Node: Rmail Rot13, Prev: Out of Rmail, Up: Rmail Reading Rot13 Messages ====================== Mailing list messages that might offend some readers are sometimes encoded in a simple code called "rot13"--so named because it rotates the alphabet by 13 letters. This code is not for secrecy, as it provides none; rather, it enables those who might be offended to avoid ever seeing the real text of the message. To view a buffer using the rot13 code, use the command `M-x rot13-other-window'. This displays the current buffer in another window which applies the code when displaying the text. File: emacs, Node: Dired, Next: Calendar/Diary, Prev: Rmail, Up: Top Dired, the Directory Editor *************************** Dired makes an Emacs buffer containing a listing of a directory, and optionally some of its subdirectories as well. You can use the normal Emacs commands to move around in this buffer, and special Dired commands to operate on the files listed. * Menu: * Enter: Dired Enter. How to invoke Dired. * Commands: Dired Commands. Commands in the Dired buffer. * Deletion: Dired Deletion. Deleting files with Dired. * Visit: Dired Visiting. Other file operations through Dired. * Marks vs Flags:: Flagging for deletion vs marking. * Operating on Files:: How to copy, rename, print, compress, etc. either one file or several files. * Shell Commands in Dired:: Running a shell command on the marked files. * Transforming File Names:: Using patterns to rename multiple files. * Comparison in Dired:: Running `diff' by way of Dired. * Subdirectories in Dired:: Adding subdirectories to the Dired buffer. * Subdirectory Motion:: Moving across subdirectories, and up and down. * Hiding Subdirectories:: Making subdirectories visible or invisible. * Updating: Dired Updating. Discarding lines for files of no interest. * Find: Dired and Find. Using `find' to choose the files for Dired. File: emacs, Node: Dired Enter, Next: Dired Commands, Up: Dired Entering Dired ============== To invoke Dired, do `C-x d' or `M-x dired'. The command reads a directory name or wildcard file name pattern as a minibuffer argument to specify which files to list. Where `dired' differs from `list-directory' is in putting the buffer into Dired mode so that the special commands of Dired are available. The variable `dired-listing-switches' specifies the options to give to `ls' for listing directory; this string *must* contain `-l'. If you use a numeric prefix argument with the `dired' command, you can specify the `ls' switches with the minibuffer after you finish entering the directory specification. To display the Dired buffer in another window rather than in the selected window, use `C-x 4 d' (`dired-other-window)' instead of `C-x File: emacs, Node: Dired Commands, Next: Dired Deletion, Prev: Dired Enter, Up: Dired Commands in the Dired Buffer ============================ The Dired buffer is "read-only", and inserting text in it is not useful, so ordinary printing characters such as `d' and `x' are used for special Dired commands. Some Dired commands "mark" or "flag" the "current file" (that is, the file on the current line); other commands operate on the marked files or on the flagged files. All the usual Emacs cursor motion commands are available in Dired buffers. Some special purpose cursor motion commands are also provided. The keys `C-n' and `C-p' are redefined to put the cursor at the beginning of the file name on the line, rather than at the beginning of the line. For extra convenience, SPC and `n' in Dired are equivalent to `C-n'. `p' is equivalent to `C-p'. (Moving by lines is so common in Dired that it deserves to be easy to type.) DEL (move up and unflag) is often useful simply for moving up. File: emacs, Node: Dired Deletion, Next: Dired Visiting, Prev: Dired Commands, Up: Dired Deleting Files with Dired ========================= The primary use of Dired is to "flag" files for deletion and then delete the files previously flagged. Flag this file for deletion. Remove deletion flag on this line. `DEL' Move point to previous line and remove the deletion flag on that line. Delete the files that are flagged for deletion. Flag all auto-save files (files whose names start and end with `#') for deletion (*note Auto Save::.). Flag all backup files (files whose names end with `~') for deletion (*note Backup::.). `. (Period)' Flag excess numeric backup files for deletion. The oldest and newest few backup files of any one file are exempt; the middle ones are flagged. `% d REGEXP RET' Flag for deletion all files whose names match the regular expression REGEXP (`dired-flag-files-regexp'). This is just like `% m' except that it uses `D' instead of `*' to mark the files. Only the non-directory part of the file name is used in matching. Use `^' and `$' to anchor matches. Exclude subdirectories by hiding them (*note Hiding Subdirectories::.). You can flag a file for deletion by moving to the line describing the file and typing `d'. The deletion flag is visible as a `D' at the beginning of the line. This command moves point to the beginning of the next line, so that repeated `d' commands flag successive files. The files are flagged for deletion rather than deleted immediately to reduce the danger of deleting a file accidentally. Until you direct Dired to expunge the flagged files, you can remove deletion flags using the commands `u' and DEL. `u' works just like `d', but removes flags rather than making flags. DEL moves upward, removing flags; it is like `u' with numeric argument automatically negated. To delete the flagged files, type `x' (`dired-expunge'). This command first displays a list of all the file names flagged for deletion, and requests confirmation with `yes'. Once you confirm, `x' deletes all the flagged files, then deletes their lines from the text of the Dired buffer. The shortened Dired buffer remains selected. If you answer `no' or quit with `C-g' when asked to confirm, you return immediately to Dired, with the deletion flags still present in the buffer, and no files actually deleted. The `#', `~' and `.' commands flag many files for deletion, based on their file names. These commands are useful precisely because they do not actually delete any files; you can remove the deletion flags from any flagged files that you really wish to keep. `#' flags for deletion all files whose names look like auto-save files (*note Auto Save::.)--that is, files whose names begin and end with `#'. `~' flags for deletion all files whose names say they are backup files (*note Backup::.)--that is, whose names end in `~'. `.' (Period) flags just some of the backup files for deletion: all but the oldest few and newest few backups of any one file. Normally `dired-kept-versions' (*not* `kept-new-versions'; that applies only when saving) specifies the number of newest versions of each file to keep, and `kept-old-versions' specifies the number of oldest versions to keep. Period with a positive numeric argument, as in `C-u 3 .', specifies the number of newest versions to keep, overriding `dired-kept-versions'. A negative numeric argument overrides `kept-old-versions', using minus the value of the argument to specify the number of oldest versions of each file to keep. The `% d' command flags all files whose names match a specified regular expression (`dired-flag-files-regexp'). Only the non-directory part of the file name is used in matching. You can use `^' and `$' to anchor matches. You can exclude subdirectories by hiding them (*note Hiding Subdirectories::.). File: emacs, Node: Dired Visiting, Next: Marks vs Flags, Prev: Dired Deletion, Up: Dired Visiting Files in Dired ======================= There are several Dired commands for visiting or examining the files listed in the Dired buffer. All of them apply to the current line's file; if that file is really a directory, these commands invoke Dired on that subdirectory (using a separate Dired buffer). Visit the file described on the current line, like typing `C-x C-f' and supplying that file name (`dired-find-file'). *Note Visiting::. Like `f', but uses another window to display the file's buffer (`dired-find-file-other-window'). The Dired buffer remains visible in the first window. This is like using `C-x 4 C-f' to visit the file. *Note Windows::. `C-o' Visit the file described on the current line, and display the buffer in another window, but do not select that window (`dired-display-file'). View the file described on the current line, using `M-x view-file' (`dired-view-file'). Viewing a file is like visiting it, but is slanted toward moving around in the file conveniently and does not allow changing the file. *Note View File: Misc File Ops. File: emacs, Node: Marks vs Flags, Next: Operating on Files, Prev: Dired Visiting, Up: Dired Dired Marks vs. Flags ===================== Instead of flagging a file with `D', you can "mark" the file with some other character (usually `*'). Most Dired commands other than "expunge" (`x') operate on files marked with `*'. Here are some commands for marking with `*' (and also for unmarking). (*Note Dired Deletion::, for commands to flag and unflag files.) Mark the current file with `*' (`dired-mark'). With a numeric argument N, mark the next N files starting with the current file. (If N is negative, mark the previous -N files.) Mark all executable files with `*' (`dired-mark-executables'). With a prefix argument, unmark all those files. Mark all symbolic links with `*' (`dired-mark-symlinks'). With a prefix argument, unmark all those files. Mark with `*' all files which are actually directories, except for `.' and `..' (`dired-mark-directories'). With a prefix argument, unmark all those files. `M-DEL MARKCHAR' Remove all marks that use the character MARKCHAR (`dired-unmark-all-files'). If you specify RET as MARKCHAR, this command removes all marks, no matter what the marker character is. With a numeric argument, this command queries about each marked file, asking whether to remove its mark. You can answer `y' meaning yes, `n' meaning no, `!' to remove the marks from the remaining files without asking about them. `c OLD NEW' Replace all marks that use the character OLD with marks that use the character NEW (`dired-change-marks'). This command is the only way to create or use marks other than `*' or `D'. The arguments are single characters--do not use RET to terminate them. You can use almost any character as a mark character by means of this command, to distinguish various classes of files. If OLD is a space (` '), then the command operates on all unmarked files; if NEW is a space, then the command unmarks the files it acts on. To illustrate the power of this command, here is how to put `*' marks on all the files that are unmarked, while unmarking all those that have `*' marks: c * t c SPC * c t SPC `% m REGEXP RET' Mark (with `*') all files whose names match the regular expression REGEXP (`dired-mark-files-regexp'). Only the non-directory part of the file name is used in matching. Use `^' and `$' to anchor matches. Exclude subdirectories by hiding them (*note Hiding Subdirectories::.). File: emacs, Node: Operating on Files, Next: Shell Commands in Dired, Prev: Marks vs Flags, Up: Dired Operating on Files ================== This section describes the basic Dired commands to operate on one file or several files. All of these commands are capital letters; all of them use the minibuffer, either to read an argument or to ask for confirmation, before they act. All use the following convention to decide which files to manipulate: * If you give the command a numeric prefix argument N, it operates on the next N files, starting with the current file. (If N is negative, the command operates on the -N files preceding the current line.) * Otherwise, if some files are marked with `*', the command operates on all those files. * Otherwise, the command operates on the current file only. Here are the commands that operate on files in this way: `C NEW RET' Copy the specified files (`dired-do-copy'). The argument NEW is the directory to copy into, or (if copying a single file) the new name. If `dired-copy-preserve-time' is non-`nil', then copying with this command sets the modification time of the new file to be the same as that of the old file. `R NEW RET' Rename the specified files (`dired-do-rename'). The argument NEW is the directory to rename into, or (if renaming a single file) the new name. Dired automatically changes the visited file name of buffers associated with renamed files so that they refer to the new names. `H NEW RET' Make hard links to the specified files (`dired-do-hardlink'). The argument NEW is the directory to make the links in, or (if making just one link) the name to give the link. `S NEW RET' Make symbolic links to the specified files (`dired-do-symlink'). The argument NEW is the directory to make the links in, or (if making just one link) the name to give the link. `M MODESPEC RET' Change the mode (also called "permission bits") of the specified files (`dired-do-chmod'). This calls the `chmod' program, so MODESPEC can be any argument that `chmod' can handle. `G NEWGROUP RET' Change the group of the specified files to NEWGROUP (`dired-do-chgrp'). `O NEWOWNER RET' Change the owner of the specified files to NEWOWNER (`dired-do-chown'). (On most systems, only the superuser can do this.) The variable `dired-chown-program' specifies the name of the program to use to do the work (different systems put `chown' in different places). `P COMMAND RET' Print the specified files (`dired-do-print'). You must specify the command to print them with, but the minibuffer starts out with a suitable guess made using the variables `lpr-command' and `lpr-switches' (the same variables that `lpr-file' uses; *note Hardcopy::.). Compress or uncompress the specified files (`dired-do-compress'). If the file appears to be a compressed file, it is uncompressed; otherwise, it is compressed. Load the specified Emacs Lisp files (`dired-do-load'). *Note Lisp Libraries::. Byte compile the specified Emacs Lisp files (`dired-do-byte-compile'). *Note Byte Compilation: (elisp)Byte Compilation. File: emacs, Node: Shell Commands in Dired, Next: Transforming File Names, Prev: Operating on Files, Up: Dired Shell Commands in Dired ======================= The dired command `!' (`dired-do-shell-command') reads a shell command string in the minibuffer and runs the shell command on all the specified files. There are two ways of applying a shell command to multiple files: * If you use `*' in the shell command, then it runs just once, with the list of file names substituted for the `*'. The order of file names is the order of appearance in the Dired buffer. Thus, `! tar cf foo.tar * RET' runs `tar' on the entire list of file names, putting them into one tar file `foo.tar'. * If the command string doesn't contain `*', then it runs once *for each file*, with the file name added at the end. For example, `! uudecode RET' runs `uudecode' on each file. What if you want to run the shell command once for each file but with the file name inserted in the middle? Or if you want to use the file names in a more complicated fashion? Use a shell loop. For example, this shell command would run `uuencode' on each of the specified files, writing the output into a corresponding `.uu' file: for file in *; uuencode $file $file >$file.uu; done The working directory for the shell command is the top level directory of the Dired buffer. The `!' command does not attempt to update the Dired buffer to show new or modified files, because it doesn't really understand shell commands, and does not know what files the shell command changed. Use the `g' command to update the Dired buffer (*note Dired Updating::.). File: emacs, Node: Transforming File Names, Next: Comparison in Dired, Prev: Shell Commands in Dired, Up: Dired Transforming File Names in Dired ================================ Here are commands that alter file names in a systematic way: `% u' Rename each of the selected files to an upper case name (`dired-upcase'). If the old file names are `Foo' and `bar', the new names are `FOO' and `BAR'. `% l' Rename each of the selected files to a lower case name (`dired-downcase'). If the old file names are `Foo' and `bar', the new names are `foo' and `bar'. `% R FROM RET TO RET' `% C FROM RET TO RET' `% H FROM RET TO RET' `% S FROM RET TO RET' These four commands rename, copy, make hard links and make soft links, in each case computing the new name by regular expression substitution from the name of the old file. The four regular expression substitution commands effectively perform `query-replace-regexp' on the selected file names in the Dired buffer. They read two arguments: a regular expression FROM, and a substitution pattern TO. The commands match each "old" file name against the regular expression FROM, and then replace the matching part with TO. You can use `\&' and `\DIGIT' in TO to refer to all or part of the old file name, as in `query-replace' (*note Query Replace::.). For example, `% R ^.*$ RET x-\& RET' renames each selected file by prepending `x-' to its name. The inverse of this, removing `x-' from the front of each file name, is also possible: one method is `% R ^x-.*$ RET \& RET'; another is `% R ^x- RET RET'. (Use `^' and `$' to anchor matches that should span the whole filename.) If the regular expression matches more than once in a file name, only the first match is replaced. Normally, the replacement process does not consider the files' directory names; it operates on the file name within the directory. If you specify a prefix argument of zero, then replacement affects the entire absolute file name including directory name. Often you will want to apply the command to all files matching the same REGEXP that you use in the command. To do this, mark those files with `% m REGEXP RET', then use the same regular expression in the command to operate on the files. To make this easier, the commands to operate use the last regular expression specified in a `%' command as a default. File: emacs, Node: Comparison in Dired, Next: Subdirectories in Dired, Prev: Transforming File Names, Up: Dired File Comparison with Dired ========================== Here are two Dired commands that compare specified files using `diff'. Compare the current file (the file at point) with another file (the file at the mark) using the `diff' program (`dired-diff'). The file at the mark is the first argument of `diff', and the file at point is the second argument. `M-=' Compare the current file with its latest backup file (`dired-backup-diff'). If the current file is itself a backup, compare it with the file it is a backup of; this way, you can compare a file with any backup version of your choice. The backup file is the first file given to `diff'. File: emacs, Node: Subdirectories in Dired, Next: Subdirectory Motion, Prev: Comparison in Dired, Up: Dired Subdirectories in Dired ======================= A Dired buffer displays just one directory in the normal case; but you can optionally include its subdirectories as well. The simplest way to include multiple directories in one Dired buffer is to specify the options `-lR' for running `ls'. (If you give a numeric argument when you run Dired, then you can specify these options in the minibuffer.) That produces a recursive directory listing showing all subdirectories at all levels. But usually all the subdirectories are too many; usually you will prefer to include specific subdirectories only. You can do this with the `i' command: Insert the contents of a subdirectory later in the buffer. Use the `i' (`dired-maybe-insert-subdir') command on a line that describes a file which is a directory. It inserts the contents of that directory into the same Dired buffer, and moves there. Inserted subdirectory contents follow the top-level directory of the Dired buffer, just as they do in `ls -lR' output. If the subdirectory's contents are already present in the buffer, the `i' command just moves to it. In either case, `i' sets the Emacs mark before moving, so `C-x C-x' takes you back to the old position in the buffer (the line describing that subdirectory). Use the `l' command (`dired-do-redisplay') to update the subdirectory's contents. Use `k' to delete the subdirectory. *Note Dired Updating::. File: emacs, Node: Subdirectory Motion, Next: Hiding Subdirectories, Prev: Subdirectories in Dired, Up: Dired Moving Over Subdirectories ========================== When a Dired buffer lists subdirectories, you can use the page motion commands `C-x [' and `C-x ]' to move by entire directories. The following commands move across, up and down in the tree of directories within one Dired buffer. They move to "directory header lines", which are the lines that give a directory's name, at the beginning of the directory's contents. `C-M-n' Go to next subdirectory header line, regardless of level (`dired-next-subdir'). `C-M-p' Go to previous subdirectory header line, regardless of level (`dired-prev-subdir'). `C-M-u' Go up to the parent directory's header line (`dired-tree-up'). `C-M-d' Go down in the directory tree, to the first subdirectory's header line (`dired-tree-down'). File: emacs, Node: Hiding Subdirectories, Next: Dired Updating, Prev: Subdirectory Motion, Up: Dired Hiding Subdirectories ===================== "Hiding" a subdirectory means to make it invisible, except for its header line, via selective display (*note Selective Display::.). Hide or reveal the subdirectory that point is in, and move point to the next subdirectory (`dired-hide-subdir'). A numeric argument serves as a repeat count. `M-$' Hide all subdirectories in this Dired buffer, leaving only their header lines (`dired-hide-all'). Or, if any subdirectory is currently hidden, make all subdirectories visible again. You can use this command to get an overview in very deep directory trees or to move quickly to subdirectories far away. Ordinary Dired commands never consider files inside a hidden subdirectory. For example, the commands to operate on marked files ignore files in hidden directories even if they are marked. Thus you can use hiding to temporarily exclude subdirectories from operations without having to remove the markers. The subdirectory hiding commands toggle; that is they unhide what was hidden and vice versa. File: emacs, Node: Dired Updating, Next: Dired and Find, Prev: Hiding Subdirectories, Up: Dired Updating the Dired Buffer ========================= This section describes commands to update the Dired buffer to reflect outside (non-Dired) changes in the directories and files, and to delete part of the Dired buffer. Update the entire contents of the Dired buffer (`revert-buffer'). Update the specified files (`dired-do-redisplay'). Delete the specified *file lines*--not the files, just the lines (`dired-do-kill-lines'). Type `g' (`revert-buffer') to update the contents of the Dired buffer, based on changes in the files and directories listed. This preserves all marks except for those on files that have vanished. Hidden subdirectories are updated but remain hidden. To update only some of the files, type `l' (`dired-do-redisplay'). This command applies to the next N files, or to the marked files if any, or to the current file. Updating them means reading their current status from the file system and changing the buffer to reflect it properly. If you use `l' on a subdirectory header line, it updates the contents of the corresponding subdirectory. To delete the specified *file lines*--not the files, just the lines--type `k' (`dired-do-kill-lines'). This command applies to the next N files, or to the marked files if any, or to the current file. If you kill the line for a file that is a directory, the directory's contents are also deleted from the buffer. Typing `C-u k' on the header line for a subdirectory is another way to delete a subdirectory from the Dired buffer. The `g' command brings back any individual lines that you have killed in this way, but not subdirectories--you must use `i' to reinsert each subdirectory. File: emacs, Node: Dired and Find, Prev: Dired Updating, Up: Dired Dired and `find' ================ You can select a set of files for display in a Dired buffer more flexibly by using the `find' utility to choose the files. To search for files with names matching a wildcard pattern use `M-x find-name-dired'. It reads arguments DIRECTORY and PATTERN, and chooses all the files in DIRECTORY or its subdirectories whose individual names match PATTERN. The files thus chosen are displayed in a Dired buffer in which the ordinary Dired commands are available. If you want to test the contents of files, rather than their names, use `M-x find-grep-dired'. This command reads two minibuffer arguments, DIRECTORY and REGEXP; it chooses all the files in DIRECTORY or its subdirectories that contain a match for REGEXP. It works by running the programs `find' and `grep'. The most general command in this series is `M-x find-dired', which lets you specify any condition that `find' can test. It takes two minibuffer arguments, DIRECTORY and FIND-ARGS; it runs `find' in DIRECTORY, passing FIND-ARGS to tell `find' what condition to test. To use this command, you need to know how to use `find'. File: emacs, Node: Calendar/Diary, Next: GNUS, Prev: Dired, Up: Top The Calendar and the Diary ************************** Emacs provides the functions of a desk calendar, with a diary of planned or past events. To enter the calendar, type `M-x calendar'; this displays a three-month calendar centered on the current month, with point on the current date. If you use prefix argument as in `C-u M-x calendar', it prompts you for the month and year to be the center of the three-month calendar. The calendar uses its own buffer and the major mode is Calendar mode. To exit the calendar, type `q'. * Menu: * Calendar Motion:: Moving through the calendar; selecting a date. * Scroll Calendar:: Bringing earlier or later months onto the screen. * Counting Days:: How many days are there between two dates? * General Calendar:: Exiting or recomputing the calendar. * Holidays:: Displaying dates of holidays. * Sunrise/Sunset:: Displaying local times of sunrise and sunset. * Lunar Phases:: Displaying phases of the moon. * Other Calendars:: Converting dates to other calendar systems. * Diary:: Displaying events from your diary. * Appointments:: Reminders when it's time to do something. * Daylight Savings:: How to specify when daylight savings time is active. File: emacs, Node: Calendar Motion, Next: Scroll Calendar, Up: Calendar/Diary Movement in the Calendar ======================== Calendar mode lets you move in logical units of time such as days, weeks, months, and years. If you move outside the three months originally displayed, the calendar display scrolls automatically through time. Moving to a date lets you view its holidays or diary entries, convert it to other calendars; moving longer time periods is useful simply to scroll the calendar. * Menu: * Calendar Unit Motion:: Moving by days, weeks, months, and years. * Move to Beginning or End:: Moving to start/end of weeks, months, and years. * Specified Dates:: Moving to the current date or another specific date. File: emacs, Node: Calendar Unit Motion, Next: Move to Beginning or End, Up: Calendar Motion Motion by Integral Days, Weeks, Months, Years --------------------------------------------- The commands for movement in the calendar buffer parallel the commands for movement in text. You can move forward and backward by days, weeks, months, and years. `C-f' Move point one day forward (`calendar-forward-day'). `C-b' Move point one day backward (`calendar-backward-day'). `C-n' Move point one week forward (`calendar-forward-week'). `C-p' Move point one week backward (`calendar-backward-week'). `M-}' Move point one month forward (`calendar-forward-month'). `M-{' Move point one month backward (`calendar-backward-month'). `C-x ]' Move point one year forward (`calendar-forward-year'). `C-x [' Move point one year backward (`calendar-forward-year'). The day and week commands are natural analogues of the usual Emacs commands for moving by characters and by lines. Just as `C-n' usually moves to the same column in the following line, in Calendar mode it moves to the same day in the following week. And `C-p' moves to the same day in the previous week. The arrow keys are equivalent to `C-f', `C-b', `C-n' and `C-p', just as they normally are in other modes. The commands for motion by months and years work like those for weeks, but move a larger distance. The month commands `M-}' and `M-{' move forward or backward by an entire month's time. The year commands `C-x ]' and `C-x [' move forward or backward a whole year. The easiest way to remember these commands is to consider months and years analogous to paragraphs and pages of text, respectively. But the commands themselves are not quite analogous. The ordinary Emacs paragraph commands move to the beginning or end of a paragraph, whereas these month and year commands move by an entire month or an entire year, which usually involves skipping across the end of a month or year. All these commands accept a numeric argument as a repeat count. For convenience, the digit keys and the minus sign specify numeric arguments in Calendar mode even without the Meta modifier. For example, `100 C-f' moves point 100 days forward from its present location. File: emacs, Node: Move to Beginning or End, Next: Specified Dates, Prev: Calendar Unit Motion, Up: Calendar Motion Beginning or End of Week, Month or Year --------------------------------------- A week (or month, or year) is not just a quantity of days; we think of new weeks (months, years) as starting on particular days. So Calendar mode provides commands to move to the beginning or end of a week, month or year: `C-a' Move point to beginning of week (`calendar-beginning-of-week'). `C-e' Move point to end of week (`calendar-end-of-week'). `M-a' Move point to beginning of month (`calendar-beginning-of-month'). `M-e' Move point to end of month (`calendar-end-of-month'). `M-<' Move point to beginning of year (`calendar-beginning-of-year'). `M->' Move point to end of year (`calendar-end-of-year'). These commands also take numeric arguments as repeat counts, with the repeat count indicating how many weeks, months, or years to move backward or forward. File: emacs, Node: Specified Dates, Prev: Move to Beginning or End, Up: Calendar Motion Particular Dates ---------------- Calendar mode provides commands for getting to a particular date specified absolutely. `g d' Move point to specified date (`calendar-goto-date'). Center calendar around specified month (`calendar-other-month'). Move point to today's date (`calendar-current-month'). `g d' (`calendar-goto-date') prompts for a year, a month, and a day of the month, and then moves to that date. Because the calendar includes all dates from the beginning of the current era, you must type the year in its entirety; that is, type `1990', not `90'. `o' (`calendar-other-month') prompts for a month and year, then centers the three-month calendar around that month. You can return to today's date with `.' (`calendar-current-month'). File: emacs, Node: Scroll Calendar, Next: Counting Days, Prev: Calendar Motion, Up: Calendar/Diary Scrolling in the Calendar ========================= The calendar display scrolls automatically through time when you move out of the visible portion. You can also scroll it manually. Imagine that the calendar window contains a long strip of paper with the months on it. Scrolling it means moving the strip so that new months become visible in the window. `C-x <' Scroll calendar one month forward (`scroll-calendar-left'). `C-x >' Scroll calendar one month backward (`scroll-calendar-right'). `C-v' `NEXT' Scroll calendar three months forward (`scroll-calendar-left-three-months'). `M-v' `PRIOR' Scroll calendar three months backward (`scroll-calendar-right-three-months'). `SPC' Scroll the next window (`scroll-other-window'). The most basic calendar scroll commands scroll by one month at a time. This means that there are two months of overlap between the display before the command and the display after. `C-x <' scrolls the calendar contents one month to the left; that is, it moves the display forward in time. `C-x >' scrolls the contents to the right, which moves backwards in time. The commands `C-v' and `M-v' scroll the calendar by an entire "screenful"--three months--in analogy with the usual meaning of these commands. `C-v' makes later dates visible and `M-v' makes earlier dates visible. These commands take a numeric argument as a repeat count; in particular, since `C-u' (`universal-argument') multiplies the next command by four, typing `C-u C-v' scrolls the calendar forward by a year and typing `C-u M-v' scrolls the calendar backward by a year. The function keys NEXT and PRIOR are equivalent to `C-v' and `M-v', just as they are in other modes. In Calendar mode, you can use `SPC' (`scroll-other-window') to scroll the other window. This is handy when you display a list of holidays or diary entries in another window. File: emacs, Node: Counting Days, Next: General Calendar, Prev: Scroll Calendar, Up: Calendar/Diary Counting Days ============= `M-=' Display the number of days in the current region (`calendar-count-days-region'). To determine the number of days in the region, type `M-=' (`calendar-count-days-region'). The numbers of days printed is *inclusive*; that is, it includes the days specified by mark and point.